Body
Materials
• 3.5 mm crochet hook
• scissors
• tapestry needle
• mercerized cotton yarn
100/170m (30g aprox)
• 100% polyester yarn
100m/230m (30g aprox)
• polyfill
• black yarn to embroider
the nose and eyes

Hipster Hat and Infinity Scarf
Materials
• 4.0mm crochet hook (for
the hat)
• 8.0mm crochet hook (for
the scarf)
• scissors
• A color of 70%acrilic/30%
yarn 100g/177m (I used la
sedificada from Pingouin)
• 2.5mm pompom
• Chuncky Acrylic
yarn(100g/50m)
• A pair of oval safety eyes
9x11mm

Blanket
Materials
• 3.5 mm crochet hook
• scissors
• tapestry needle
• mercerized cotton yarn
100g/170m (30g aprox)
• hot glue
• 5cm pompons
• 30cm tshirt yarn

Abbreviations
This pattern was writing using U.S.A. terms.
dec decrease (sc 2
stitches together
inc increase (sc in
indicated stitch 2 times)
sc single crochet
ch chain stitch
slst slip stitch
st stitch
hdc half double crochet
dc double crochet
MR magic ring

We will start with a snout!
With a cotton yarn and a 4.0mm crochet hook
Snout
1.- 6sc in a MR
2.- 6inc =12sc
3.-(1sc, 1inc) x6 =18sc
4 to 6.- 1sc in each st
Close with a slst and Cut the yarn leaving a long tail to sell the nose to the
head.

Llama body
The llama body starts from the legs to the head.
Legs (make 04).
For the legs 01 and 03 cut the yarn after the round 10.
For the legs 02 and 04 see the following instructions.
1.- 6sc in a MR=6
2.- (1inc, 1sc) x 3=9
3,4.- 1sc in each st= 9sc
5.- (2sc, 1inc) x 3=12sc
6,7.- 1sc in each st= 12sc
8.- (3sc, 1inc) x 3=15sc
9,10.- 1sc in each st= 15sc
Close with a slst and cut the yarn.
For the legs 02 and 04, don’t cut the yarn. Join the leg 02 to the leg 01 with a
3sc. Close and cut the yarn.
After, joining the leg 04 to the leg 03 with a 3sc, make 5ch and make 1sc
between the legs 01 and 02.
Now, you have a part of you. We are going to start to work the body in rounds.
You will put a marker on the 2nd sc of the 1st leg.

1.- Make 12sc in the first leg, 1sc between the 1st and 2nd legs a and
11sc in the second legs.
1dec (12thst + 1stch), 1hdc, 1dc, 1hdc, 1dec (5thst + 1st dc of 3rd leg).
11sc in the 3rd leg
1sc between 3rd and 4th legs
11sc in the 4th leg, 1dec(12thsc of the 4th leg + 1stch)
1hdc, 1dc, 1hdc
1dec (5thst + 1stsc of the 1st leg)= 56sc.

YES! You finished the first round, I promise, is the most
difficult round!!!!
2.- 23sc, 1dec, 1dc, 1dec, 23sc, 1dec, 1dc, 1dec=52sc
3.- 24sc, 1hdc, 25sc, 1hdc, 1sc=52sc
Now, if you want it’s time to change the yarn.
4 to 7.- 1sc in each sc=52sc
8.- 9sc, 1dec, 7sc, 1dec, 32sc=50st
9.- 9sc, 1dec, 5sc, 1dec, 32sc=48st
10.- 9sc, 1dec, 3sc, 1dec, 32sc=46sc
11.- 9sc, 1dec, 1sc, 1dec, 32sc=44sc
12.- 11sc.
Have sure that the last sc is in the middle back of the llama. If not, make
some sc as necessary to.
Join the both sides of the piece with 13slst, leaving 17st unworked in the
other extreme of the piece and the body.
Now stuff firmly the legs and the body, observing that the Llama´s legs are
touching the surface together
Move the marker for the next st

Neck
13.- 17sc + 1sc in the middle line
14.- 1 sc in each st= 18sc
15.- (7sc, 1dec) x 2=16sc
16.- 1 sc in each st= 16sc
17.- (6sc, 1dec) x 2=14sc
18,19.- 1 sc in each st= (14sc)
20.- (5sc, 1dec) x 2=12sc
21.- 1 sc in each st= 12sc
Stuff firmly the neck.

Head
22.- (1sc, 1inc) =18sc
23.- (2sc, 1inc) =24sc
24.- (3sc, 1inc) =30sc
25 to 30.- (6 rounds) 1sc in each st= 30st
31.- (3sc, 1dec) x 6= 24sc
Stop now! It´s time to sell the nose on to the head and put
the safety eyes!
32.- (2sc, 1dec) x 6= 18sc
33.- (2sc, 1dec) x6=12sc
34.- 6dec=6sc
Close with slst leaving a tail to sell.

Tail
1- 6sc in a MR
2- (2sc 1 inc) x2= 8sc
3- to 6 1sc in each st= 8sc
Leave a long tail to sell on to the body.

Ears (Make 2)
1.- 4sc in a MR =4sc
2.- (1sc, 1inc) x 2= 6sc
3.- (2sc, 1inc) x 2= 8sc
3 to 8- 1sc in each st= 8 sc
Assemble the llama

Hipster Hat
1.- Make 8hdc in a MR, close with a slst, ch2
2.- 8hdcinc= 16hdc, close with a slst, ch2
3.- (1hdc, 1hdcinc) x 8= 24hdc, close with a slst, ch2
4- 1hdc in each hdc=24 close with a sl, ch2
5.- (2hdc, 1hdcinc) x 8=32 hdc, close with a slst, ch2
6.- 4hdc, 4ch (miss 4hdc) 8hdc, 4ch (miss 4hdc) 12hdc =32sc, close with a slst, ch2
7.- 4hdc, 4hdc in the chain, 8hdc, 4hdc in the chain, 12hdc = 32hdc, close with a slst, ch2
8 and 9.- 1hdc in each hdc= 32hdc.
Close with a slst and hide the yarn
Put the pompom over the hat.

Infinity Scarf
With a chunky yarn you have chosen, make many chains as necessary to
make two rounds on the neck of the llama. Make 2 more chains and close the ring.
1-Ch2, make 1hdc in each chain and close with a st.
Hide the yarn.

Glasses
If you don´t have an amigurumi glasses, you can to improvise with a 2 rings
for a keychain and a thin black yarn!!!! I used a cotton yarn Bella(100g/450m)
1-With a proper crochet hook for a thin yarn, make some sc as necessary for
to cover the first ring (23sc with Bella yarn). Close with a slst. Don´t cut the
yarn
2-Ch5, cover the other the ring with a some sc as necessary, close with a slst.
3-Make 5slst in each slst of the previous round.
Close with a slst, cut and hide the yarn. To fix the glasses to the llama face
you will need a little bit of a hot glue in a specific place

Blanket
1.- Start with a 7chain
In the second from hook, make a sc and make more 5sc, 1ch. Turn the work.
2.-16(15 rows) 6sc, 1ch turn
Alternate the colors as you wish (even 2 or 3 rows).
After the last row, make 1sc around the piece, in each corner, make 3sc
Hide the yarn.
Fasten the blanket to the llama with a 30cm of t-shirt yarn. Hold the pompom
to the blanket with a hot glue.

More Amigurumi Llama İdeas

Abbreviations

SC– single crochet
SC INC– single crochet increase (2 SC in each stitch)

INV DEC– Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)

Magic Circle– Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Always move your stitch marker to the last stitch in the round. This pattern is worked in continuous rounds.

Head
Using the worsted weight yarn:
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Rounds 4-5: SC in each around (18)
Round 6: SC in first 2, SC INC in next. Repeat around. (24)
Round 7-8: SC in each around. (24)
Round 9: SC in first 3, SC INC in next. Repeat around. (30)
Round 10: SC in each stitch around. (30)
Round 11: SC in first 4, SC INC in next. Repeat around. (36)
Change to Pipsqueak yarn.
Round 12: SC in first 5, SC INC in next. Repeat around. (42)
Round 13-18: SC in each around. (42)
Sew the nose and attach the eyes here. The eyes I attached between the rows 10 and 11, about 7 stitches apart. Double check that they are the same height before you attach the backs.
Round 19: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 20: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 21: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 22: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 23: SC in the first, INV DEC in the next. Repeat around. (12)
Round 24: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed.

Ears (make two)
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around. (6)
Round 3: SC INC in each around. (12)
Round 4: SC in first, SC INC in next. Repeat around. (18)
Round 5: SC in the first 2, SC INC in next. Repeat around. (24)
Rounds 6-8: SC in each around. (24)
Round 9: SC in first 2, INV DEC in next. Repeat around. (18)
Round 10: SC in first, INV DEC in next. Repeat around. (12)
Round 11: SC in each around.
Fasten off, leaving a tail to sew on the head. Pinch the bottom of the ear to make a little crease and sew a few stitches to hold the shape. I attached the ears 4 rows back from where the white fluffy yarn starts about level with the eyes.

Body (this part is just a tube.)

Using the Pipsqueak yarn:

Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Round 7: SC in first 5, SC INC in next. Repeat around. (42)
Rounds 8-17: SC in each around. (42)
Round 18: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 19: SC in each around. (36)
Round 20: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 21: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 22: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 23: Sc in the first, INV DEC in the next. Repeat around. (12)

Decrease in each around as you can and then sew the remaining hole together.

Neck

Chain 21. Attach to the first chain so you have a circle. Take care not to twist the chain when you connect it. Attach the stitch marker here. Crochet in each stitch around, for a total of 7 rows.

Pin this tube to the front of the body. Make sure it is centered, then attach the bottom by sewing around, multiple times if you need to. Stuff it very well and pin the head to the top. Sew the head on.

Legs (Make 4)

Starting with the worsted weight yarn
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Rounds 4-10: SC in each around (18)
Change to the pipsqueak yarn.
Rounds 11-18: SC in each around. (18)
Fasten off and leave a long tail to sew onto the body. Stuff up to the worsted weight line but don’t stuff too much more than that.

When you attach the legs, use pins and a large needle. I pin the front legs first. I made sure the legs both lay flat on the table. If helpful, prop the back part of the body on something even with the legs. Attach the tops. Repeat with the back legs.

Tail
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3-7: SC in each around. (12)
Fasten off and leave a long tail to sew onto the body. I did not stuff my tail, just flattened it!

Neck Pom Poms
I made 3 pom poms using the smallest Clover pom maker (the pink one). Chain 35 and fasten off. Sew two pom poms on one end and one on the other. I just twisted the one around the two to fasten.

Blanket
Row 1: Chain 30 and turn. HDC in the second chain from the end.
Rows 2-3: HDC in each stitch across. (28)
Row 3: Change to an accent color. SC in each across. (28)
Rows 4-5: HDC in each stitch across. (28)
Row 6: Change to an accent color. SC in each across. (28)
Rows 7-8: HDC in each stitch across. (28)
Row 9: Change to an accent color. SC in each across. (28)
Rows 10-11: HDC in each stitch across. (28)

Cut 3 inch pieces for the fringe. Attach to the edge by folding the pieces in half and pulling through the edge of the blanket with your hook. Pull the two edges through the loop and pull tight.

Materials:
Yarn Durable Furry, 100% Polyester, 50g / 35m
– silver gray – 3 skeins
Yarn Durable Cozy fine, 58% cotton, 42% polyacrylic, 50g / 105m
– ivory – 1 skein
– ash – 1 skein
Hooks 4 and 7 mm.
Big eye needle
Markers
Scissors
Filler
Chenille wire
Safety eyes 15 mm

Abbreviations
cc- connecting column
sc – single crochet
hdc – half crochet
dc – double crochet
inc – increase
dec – decrease
* * x? – repeat description between asterisks
= () – total number – in the loop in a row
Level of difficulty: experience with fur yarn.
Size: 33 cm from head to toe

Muzzle

Ivory color, hook 4 mm

Toer 1: 6 sc into magic ring = (6)

Toer 2: 6 inc = (12)

Toer 3: * 1 sc, 1 inc * x6 = (18)

Toer 4: * 2 sc, 1 inc * x6 = (24)

Toer 5: 24 sc = (24)

Toer 6: * 3 sc, 1 inc * x6 = (30)

Toer 7 – 8:30 sc = (30)

Toer 9: 2 loops skip, 10 dc in one loop, 2 loops skip, 6 hdc,

Skip 2 loops, 10 dc in one loop.

Do not knit the rest of the loops.

Close and set your face aside.

Head and neck

Silver gray yarn, hook 7 mm.

Toer 1: 6 sc into magic ring = (6)

Toer 2: 6 inc = (12)

Toer 3: * 1 sc, 1 inc * x6 = (18)

Toer 4: * 2 sc, 1 inc * x6 = (24)

Toer 5: * 3 sc, 1 inc * x6 = (30)

Toer 6 – 11: 30 sc = (30)

Toer 12: * 3 sc, 1 dec * x6 = (24)

Toer 13: * 2 sc, 1 dec * x6 = (18)

Toer 14: * 1 sc, 1 dec * x6 = (12)

Toer 15 – 21: 12 sc = (12)

Close, leave a long thread for sewing. Fill your head slightly and identify

muzzle position. Insert the safety eyes into the loop with the 10th dc through the face and through

the head. Once you are satisfied with the position of the eyes, fix them. Now

Stuff your head tightly and insert the chenille wire into your neck. Sew the muzzle to the head,

stuffing it while sewing.

Ears (x2)

Ivory yarn, hook 4 mm.

Toer 1: 6 sc into magic ring = (6)

Toer 2: 6 inc = (6)

Toer 3: * 1 sc, 1 inc * x3 = (9)

Toer 4: * 2 sc, 1 inc * x3 = (12)

Toer 5: * 3 sc, 1 inc * x3 = (15)

Toer 6: * 4 sc, 1 inc * x3 = (18)

Toer 7: * 5 sc, 1 inc * x3 = (21)

Toer 8: * 6 sc, 1 inc * x3 = (24)

Toer 9: * 7 sc, 1 inc * x3 = (27)

Fold the edges of the ears together and knit 13 sc, knitting two sides at the same time.

Pinch your ears and sew with 6 stitches to your head. Hide the end of the thread.

Body

Silver gray yarn, hook 7 mm.

Toer 1: 6 sc into magic ring = (6)

Toer 2: 6 inc = (12)

Toer 3: * 1 sc, 1 inc * x6 = (18)

Toer 4: * 2 sc, 1 inc * x6 = (24)

Toer 5: * 3 sc, 1 inc * x6 = (30)

Toer 6: * 4 sc, 1 inc * x6 = (36)

Toer 7 – 16: 36 sc = (36)

Toer 17: * 4 sc, 1 dec * x6 = (30)

Toer 18: * 3 sc, 1 dec * x6 = (24)

Toer 19: 24 sc = (24)

Toer 20: * 2 sc, 1 dec * x6 = (18) Tightly fill the body

Toer 21: * 1 sc, 1 dec * x6 = (12)

Toer 22: 6 dec = (6)

Close, tighten the hole. Hide the end of the thread.

The first row spacecraft is the back of the alpaca. Sew your head to the front of your body,

continuing to stuff your neck while sewing. Cut the thread.

Embroider nose with ash-colored yarn

Feet (x4)

Yarn of ash color, hook 4 mm.

Toer 1: 6 sc into magic ring = (6)

Toer 2: 6 inc = (12)

Toer 3: * 1 sc, 1 inc * x6 = (18)

Toer 4 – 7: 18 sc = (18)

We change to silver-gray yarn and a hook of 7 mm.

Toer 8: * 1 sc, 1 loop skip * x9 = (9)

Toer 9 – 12: 9 sc = (9)

Close, leave a long thread for sewing. Tightly fill and sew on legs

to the lower body.

Tail

Silver gray yarn, hook 7 mm.

Toer 1: 4 sc into magic ring = (4)

Toer 2 – 4: 4 sc = (4)

Close, leave a long thread for sewing. Lightly fill and sew on the tail.

to the back of the body.

Abbreviations

CH – chain
SC – single crochet
DC – double crochet
DEC – decrease
İNC – increase
SL-ST – slip-stitch
() x? – repeat description between
brackets? times
= () – the total number of loops in a row

Material

Yarn (you can use any wool you want and corresponding hooks)

2.5mm hook

Hook 3.0 mm for roses

Safety eyes 10 mm

Scissors

Filler

Sewing needle

Pins, marker

Notes:

yarn: Schachenmayr Catania

100% mercerized cotton

A: 105 natural D: 258 strawberry

B: 172 silver E: 246 pink

C: 192 garnet F: 110 black

– We work in a spiral, unless otherwise specified

– Fill as you knit

– Color change is always done on the last loops of the previous row

– Mark the beginning of the row with a marker

– With the materials given here, the toy is about 27 cm high.

Head:

natural color

1: 6 sc into magic ring = (6)

2: 6 inc = (12)

3: (1 sc, 1 inc) x6 = (18)

4: (2 sc, 1 inc) x6 = (24)

5: (3 sc, 1 inc) x6 = (30)

6: (4 sc, 1 inc) x6 = (36)

7: (5 sc, 1 inc) x6 = (42)

8: (6 sc, 1 inc) x6 = (48)

9: (7 sc, 1 inc) x6 = (54)

10: (8 sc, 1 inc) x6 = (60)

11-22: 60 sc = (60)

Insert safety eyes between 14-15 rows with a distance of 14 loops.

23: (8 sc, 1 dec) = (54)

24: (7 sc, 1 dec) = (48)

25: (6 sc, 1 dec) = (42)

26: (5 sc, 1 dec) = (36)

27: (4 sc, 1 dec) = (30)

28: (3 sc, 1 dec) = (24)

We stuff, we continue to knit a neck.

Neck:

29-42: 24 sc = (24)

We stuff, we continue to knit a body.

Body:

The body begins to knit from 19 ch.

1: 19 ch, turn = (19)

2: in the 2nd loop from the hook: 1 inc, 17 sc, 24 sc around the neck, 18 sc on

the other side of the chain = (61)

3: 2 inc, 58 sc, 1 inc = (64)

4: (1 sc, 1 inc) x2, 27 sc, 1 inc, 3 sc, 1 inc, 27 sc, 1 inc = (69)

5: (2 sc, 1 inc) x2, 62 sc, 1 inc = (72)

6: (3 sc, 1 inc) x2, 27 sc, 1 inc, 5 sc, 1 inc, 29 sc, 1 inc = (77)

7: (4 sc, 1 inc) x2, 67 sc = (79)

8: 39 sc, 1 inc, 7 sc, 1 inc, 31 sc = (81)

9-21: 81 sc = (81)

22: (4 sc, 1 dec) x2, 26 sc, 1 dec, 11 sc, 1 dec, 26 sc, 1 dec = (76)

23: 76 sc = (76)

Now we knit about 7 sc to go to the middle of the back. Do not cut the thread

continue to knit legs.

Legs:

You start with the first leg immediately after the 23rd row of the body.

You need 8 markers (threads or paper clips) to mark the beginning and end of 4

legs.

After crocheting to the middle of the back of the llama, knit another 3 sc.

Put a marker. This is the beginning of the first leg.

Now we knit in the following sequence (see photo):

9 sc for the first leg, 14 sc between the first and second,

9 sc for the second leg, 6 sc between the second and third (in front of the llama)

9 sc for the third leg, 14 sc between the third and fourth,

9 sc for the fourth leg and finally 6 sc between the fourth and first.

9 mid

14 backs

9 Front

Back 6

Foot 1:

1: 9 sc, 9 ch

2: close the sc ring into the first loop

first row, 17 sc = (18)

3–7: 18 sc = (18)

Change to silver color

8: behind the back wall of the hinge (4 sc, 1 dec) x3 = (15)

9-14: 15 sc = (15)

15: (3 sc, 1 dec) x3 = (12)

16: 12 sc = (12)

17: (2 sc, 1 dec) x3 = (9)

18: behind the back wall of the loop (1 sc, 1 dec) x3 = (6)

Leg 2:

after 14 loops, attach the thread to the 15th

and knit the second leg

1-18 row like the first leg

Leg 3:

skipping 6 loops, attach the thread to the 7th and

knit the third leg

1-18 row like the first leg

Leg 4:

after 14 loops, attach the thread to the 15th

and knit the fourth leg

1-18 row like the first leg

Stuff your legs tight, otherwise the llama will not

stand alone.

 5

Lama Lou Häkelanleitung by @ anni_gurumi Anna Suppanz

Stomach:

natural color

Knit belly in rotary rows

Attach the thread to the 23rd row of the body between

1st and 2nd legs.

1: 14 sc, 1 ch, turn = (14)

2-6: 14 sc, 1 ch, turn = (14)

7: 14 sc, 6 ch, rotation = (14 sc + 6 ch)

8: in the 2nd loop from the hook: 19 sc, 6 ch,

rotation = (19 sc + 6 ch)

9: in the 2nd loop from the hook: 24 sc, 1 ch,

rotation = (24)

10: 24 sc, 1 ch, turn = (24)

11: 19 sc, 1 ch, turn = (19)

12-16: 14 sc, 1 ch, turn = (14)

Use your pins to lock your stomach

on the body and sew, do not forget to stuff!

6

Ears (x2):

natural color

1: 5 sc into magic ring = (5)

2: 5 sc = (5)

3: 5 inc = (10)

4: 10 sc = (10)

5: (1 sc, 1 inc) x5 = (15)

6: 15 sc = (15)

7: (2 sc, 1 inc) x5 = (20)

8-15: 20 sc = (20)

Leave a long thread for sewing.

Fold your ears in half and make a few stitches (see photo).

Sew the ears to the head.

Muzzle:

silver color

1: 6 sc into magic ring = (6)

2: 6 inc = (12)

3: (1 sc, 1 inc) x6 = (18)

4: (2 sc, 1 inc) x6 = (24)

5-8: 24 s bn = (24)

9: (3sc, 1 inc) x6 = (30)

10:30 sc = (30)

To close. Leave a long thread for sewing. Fill the face and sew.

Embroider eyelashes and nose.

Bridle and Reins:

pink color

Bridle:

1:30 ch close up sl-st ring

2:30 sc

To close. Sew to the muzzle.

Reins:

Tip: If you want to embroider the reins, do

them a little wider, knit the third row.

1: 61 ch, turn

2: in the 2nd loop from the hook: 60 sc

Attach the reins on the left and right of the bridle.

Tip: You can decorate the reins, as in the photo.

 7

Roses (5-6 pcs):

(pomegranate, strawberry, pink)

hook 3.0 mm

1:21 ch

2: into the 3rd loop from the hook, 5 dc,

1 loop skip, 1 sc, 1 loop skip,

6 dc, 1 loop skip, 1 sc, 1 loop skip, 7 dc, 1 loop skip,

1 sc, 1 loop skip, 8 dc, 1 loop skip, 1 sc, 1 loop skip,

9 dc, sl-st

Roll up, fasten, leave a long thread for sewing. Make 4-5 different roses

flowers, fix with pins, about 8 rows from the ear and sew.

Blankets:

black color

1:15 ch

2: in the 2nd loop from the hook:

1 inc, 12 sc, 3 sc in one loop,

on the other side of the chain: 12 sc,

1 sc in the first loop

3: 2 inc, 12 sc, 3 inc, 12 sc, 1 inc

4: (1 sc, 1 inc) x2, 12 sc,

(1 sc, 1 inc) x3, 13 sc, 1 inc

5: Change to strawberry color

(2 sc, 1 inc) x2, 12 sc, (2 sc, 1 inc) x3, 14 sc, 1 inc

6: (3 sc, 1 inc) x2 12 sc, (3 sc, 1 inc) x3, 15 sc, 1 inc

7: Change to pink

(4 sc, 1 inc) x2, 12 sc, (4 sc, 1 inc) x3,

16 sc, 1 inc

8: (5 sc, 1 inc) x2, 12 sc, (5 sc, 1 inc) x3,

17 sc, 1 inc

9: Change to garnet color

(6 sc, 1 inc) x2, 12 sc, (6 sc, 1 inc) x3,

18 sc, 1 inc

10: (7 sc, 1 inc) x2, 12 sc, (7 sc, 1 inc) x3,

19 sc, 1 inc

To close.

 eight

Lama Lou Häkelanleitung by @ anni_gurumi Anna Suppanz

Decorate the llama with pompons

Tail:

1: 6 sc into magic ring = (6)

2: (2 sc, 1 inc) x2 = (8)

3: (3 sc, 1 inc) x2 = (10)

4: (4 sc, 1 inc) x2 = (12)

5-7: 12 sc = (12)

To close. Leave a long thread for sewing.

Fold in half and sew to the back of the body.

Congratulations, Lama Lu is ready !!